Bhuleshwar, Mumbai, Maharashtra
GST No. 27ADVPJ1765B1ZF
Call 08047641355 90% Response Rate
Element | Min | Max |
Carbon | -- | 0.10 |
Nickel Bolts | Bal. | |
Chromium | 20.0 | 23.0 |
Iron | -- | 5.00 |
Silicon | -- | 0.50 |
Manganese | -- | 0.50 |
Sulfur | -- | 0.015 |
Phosphorus | -- | 0.015 |
Molybdenum | 8.00 | 10.0 |
Titanium | -- | 0.40 |
Cobalt | -- | 1.00 |
Columbium + Tantalum | 3.15 | 4.15 |
Aluminum | -- | 0.40 |
» Chemical and petrochemical processing
» Components where exposure to high mechanical stress and sea water are required
» Flare stacks on offshore oil platforms
» Gas turbines, rocket motors/engines, and space craft
» Pollution control equipment
» Nuclear reactors
For More Information Visit Our Website:-
http://www.rimcooverseas.com/Minimum Order Quantity: 1 Piece
Product Brochure
Size | M3 TO M52 |
Thread Type | PITCH |
Material Grade | Inconel |
Grade | Inconel 625 |
Rust Resistant | Yes |
Material | Inconel |
Specifications | : | ASTM B 166 ASME SB 166 |
Standard | : | DIN, ASTM, BS and all International Standards |
Length | : | 3 mm to 200 mm |
Size | : | M3 M56 | 3/6 to 2 | Custom Sizes |
Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
OTHER GRADES OF INCONEL BOLTS
CHARACTERISTICS OF INCONEL BOLTS
» Good resistance to acids, such as sulfuric, phosphoric, nitric, and hydrochloric
» Almost completely free from chloride induced stress corrosion cracking
» Excellent mechanical properties at both extremely low and extremely high temperatures
» Outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion
» High resistance to oxidation at elevated temperatures
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Surface Finish | Electroplated |
Shape | WASHER |
Grade | ALLOY 20 |
Material Grade | Nickel Alloy |
I Deal In | New Only |
Brand | RIMCO |
NICKEL ALLOY SPECIFICATIONS | ||
Specifications | : | ASTM B 160 ASME SB 160 |
Standard | : | DIN, ASTM, BS and all International Standards |
Length | : | 3 mm to 200 mm |
Size | : | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
GRADES OF NICKEL BOLTS
CHARACTERISTICS OF NICKEL ALLOY
» Outstanding resistance to chloride pitting and crevice corrosion cracking
» Immune to chloride ion stress corrosion cracking
» Resistant to caustics
» Resistant to seawater, in both flowing and stagnant • conditions, and under fouling
» It is a good conductor of heat and electricity.
» It’s melting point is 1453 °C and boiling point is 2913 °C.
» The metal dissolves slowly in dilute acids.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Material Grade | Inconel |
Grade | 600 |
Type | WASHER |
Color | PTFE COATED |
Resistant Temperature | Annealed** |
Material | METAL |
Specifications | : | ASTM B 166 ASME SB 166 |
Standard | : | DIN, ASTM, BS and all International Standards |
Length | : | 3 mm to 200 mm |
Size | : | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
OTHER GRADES OF INCONEL BOLTS
CHARACTERISTICS OF INCONEL BOLTS
» Good resistance to acids, such as sulfuric, phosphoric, nitric, and hydrochloric
» Almost completely free from chloride induced stress corrosion cracking
» Excellent mechanical properties at both extremely low and extremely high temperatures
» Outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion
» High resistance to oxidation at elevated temperature
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Material Grade | Inconel |
Grade | 600 |
Type | STUD |
Finishing | PTFE COATED |
I Deal In | New Only |
Material | METAL |
Specifications | : | ASTM B 166 ASME SB 166 |
Standard | : | DIN, ASTM, BS and all International Standards |
Length | : | 3 mm to 200 mm |
Size | : | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
OTHER GRADES OF INCONEL BOLTS
CHARACTERISTICS OF INCONEL BOLTS
» Good resistance to acids, such as sulfuric, phosphoric, nitric, and hydrochloric
» Almost completely free from chloride induced stress corrosion cracking
» Excellent mechanical properties at both extremely low and extremely high temperatures
» Outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion
» High resistance to oxidation at elevated temperatures
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Finish | Polished |
Material Grade | Inconel |
Grade | 600 |
Type | SCREW |
Color | PTFE COATED |
Material | METAL |
Specifications | : | ASTM B 166 ASME SB 166 |
Standard | : | DIN, ASTM, BS and all International Standards |
Length | : | 3 mm to 200 mm |
Size | : | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
OTHER GRADES OF INCONEL BOLTS
CHARACTERISTICS OF INCONEL BOLTS
» Good resistance to acids, such as sulfuric, phosphoric, nitric, and hydrochloric
» Almost completely free from chloride induced stress corrosion cracking
» Excellent mechanical properties at both extremely low and extremely high temperatures
» Outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion
» High resistance to oxidation at elevated temperatures
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Material Grade | Inconel |
Grade | 625 |
Type | Bolts Stud Bolts,Hex Head Bolts,Socket Hexagon Head Screw Anchor Bolts |
Surface Finish | Cadmium Zinc Plated, Blackeing, Nickel Plated |
Shape | Cylinderical, Circle, Round |
Thread Type | Yes |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Size | M3 TO M52 |
Material | Nickel Alloy |
Quantity Per Pack | 12 |
Grade | ALLOY 20 |
Bolt Type | HEX HEAD |
Rust Resistant | Yes |
NICKEL ALLOY SPECIFICATIONS | ||
Specifications | : | ASTM B 160 ASME SB 160 |
Standard | : | DIN, ASTM, BS and all International Standards |
Length | : | 3 mm to 200 mm |
Size | : | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
GRADES OF NICKEL BOLTS
CHARACTERISTICS OF NICKEL ALLOY
» Outstanding resistance to chloride pitting and crevice corrosion cracking
» Immune to chloride ion stress corrosion cracking
» Resistant to caustics
» Resistant to seawater, in both flowing and stagnant • conditions, and under fouling
» It is a good conductor of heat and electricity.
» It’s melting point is 1453 °C and boiling point is 2913 °C.
» The metal dissolves slowly in dilute acids.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Nut Type | HEX NUT |
Material | INCONEL |
Grade | 825 |
Shape | Cylinderical, Round, Circle |
Length | 10 MM TO 3000 MM |
Thread Type | Yes |
specifications | : | astm b 166 asme sb 166 |
standard | : | din, astm, bs and all international standards |
length | : | 3 mm to 200 mm |
size | : | m3 – m56 . 3/6′ to 2′ Custom sizes |
type | : | hex head bolts, square bolts, u bolts, eye bolts, t bolt, hex bolt, lag bolts, counter sunk bolts, hex head nuts, square nuts, lock nuts, eye nuts, wing nuts, t nuts, panel nuts, coupling nuts, dome nuts, acorn nuts |
other grades of inconel bolts
characteristics of inconel bolts
» good resistance to acids, such as sulfuric, phosphoric, nitric, and hydrochloric
» almost completely free from chloride induced stress corrosion cracking
» excellent mechanical properties at both extremely low and extremely high temperatures
» outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion
» high resistance to oxidation at elevated temperatures
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Surface Finish | FINE |
Finishing | PTFE COATED |
Head Shape | HEX HEAD |
Material Grade | ALLOY 20 |
Material | NICKLE ALLOY |
Brand | RIMCO |
NICKEL ALLOY SPECIFICATIONS | ||
Specifications | : | ASTM B 160 ASME SB 160 |
Standard | : | DIN, ASTM, BS and all International Standards |
Length | : | 3 mm to 200 mm |
Size | : | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
GRADES OF NICKEL BOLTS
CHARACTERISTICS OF NICKEL ALLOY
» Outstanding resistance to chloride pitting and crevice corrosion cracking
» Immune to chloride ion stress corrosion cracking
» Resistant to caustics
» Resistant to seawater, in both flowing and stagnant • conditions, and under fouling
» It is a good conductor of heat and electricity.
» It’s melting point is 1453 °C and boiling point is 2913 °C.
» The metal dissolves slowly in dilute acids.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Material | Nickel Alloy |
Thread Type | UNF |
Grade | ALLOY 20 |
Finishing | FINE |
Coated | PTFE |
Brand | RIMCO |
NICKEL ALLOY SPECIFICATIONS | ||
Specifications | : | ASTM B 160 ASME SB 160 |
Standard | : | DIN, ASTM, BS and all International Standards |
Length | : | 3 mm to 200 mm |
Size | : | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
GRADES OF NICKEL BOLTS
CHARACTERISTICS OF NICKEL ALLOY
» Outstanding resistance to chloride pitting and crevice corrosion cracking
» Immune to chloride ion stress corrosion cracking
» Resistant to caustics
» Resistant to seawater, in both flowing and stagnant • conditions, and under fouling
» It is a good conductor of heat and electricity.
» It’s melting point is 1453 °C and boiling point is 2913 °C.
» The metal dissolves slowly in dilute acids.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Material | Nickel Alloy |
Usage/Application | OIL & GAS |
Surface Finish | FINE |
Grade | ALLOY 20 |
Diameter | M3 TO M52 |
Is It ISO Certified | ISO Certified |
Brand | RIMCO |
NICKEL ALLOY SPECIFICATIONS | ||
Specifications | : | ASTM B 160 ASME SB 160 |
Standard | : | DIN, ASTM, BS and all International Standards |
Length | : | 3 mm to 200 mm |
Size | : | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
GRADES OF NICKEL BOLTS
CHARACTERISTICS OF NICKEL ALLOY
» Outstanding resistance to chloride pitting and crevice corrosion cracking
» Immune to chloride ion stress corrosion cracking
» Resistant to caustics
» Resistant to seawater, in both flowing and stagnant • conditions, and under fouling
» It is a good conductor of heat and electricity.
» It’s melting point is 1453 °C and boiling point is 2913 °C.
» The metal dissolves slowly in dilute acids.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Size | M3 TO M52 |
Grade | ALLOY 20 |
Rust Resistance | Yes |
Is It Customised | Customisation |
I Deal In | New Only |
Rust Resistant | Yes |
Material | Nickel Alloy |
NICKEL ALLOY SPECIFICATIONS | ||
Specifications | : | ASTM B 160 ASME SB 160 |
Standard | : | DIN, ASTM, BS and all International Standards |
Length | : | 3 mm to 200 mm |
Size | : | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
GRADES OF NICKEL BOLTS
CHARACTERISTICS OF NICKEL ALLOY
» Outstanding resistance to chloride pitting and crevice corrosion cracking
» Immune to chloride ion stress corrosion cracking
» Resistant to caustics
» Resistant to seawater, in both flowing and stagnant • conditions, and under fouling
» It is a good conductor of heat and electricity.
» It’s melting point is 1453 °C and boiling point is 2913 °C.
» The metal dissolves slowly in dilute acids.
Additional Information:
View Complete details