Rimco Overseas
Bhuleshwar, Mumbai, Maharashtra
GST No. 27ADVPJ1765B1ZF
TrustSEAL Verified
Call 08048930395
83% Response Rate
SEND EMAIL
| Element | Min | Max |
| Carbon | -- | 0.10 |
| Nickel Bolts | Bal. | |
| Chromium | 20.0 | 23.0 |
| Iron | -- | 5.00 |
| Silicon | -- | 0.50 |
| Manganese | -- | 0.50 |
| Sulfur | -- | 0.015 |
| Phosphorus | -- | 0.015 |
| Molybdenum | 8.00 | 10.0 |
| Titanium | -- | 0.40 |
| Cobalt | -- | 1.00 |
| Columbium + Tantalum | 3.15 | 4.15 |
| Aluminum | -- | 0.40 |
» Chemical and petrochemical processing
» Components where exposure to high mechanical stress and sea water are required
» Flare stacks on offshore oil platforms
» Gas turbines, rocket motors/engines, and space craft
» Pollution control equipment
» Nuclear reactors
For More Information Visit Our Website:-
http://www.rimcooverseas.com/
Product Details:
| Minimum Order Quantity | 1 Piece |
| Pressure | High Pressure |
| Media | Air,Gas |
| Temperature Of Media | High Temperature |
| WOG Rating | 150,300,600 |
| Is It Branded | Branded |
| I Deal In | New Only |
| Fire Safe | Yes |
Delivery Condition : Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Inspection, Test Reports : Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports
INCONEL 600 VALVES GRADE EQUIVALENTS| STANDARD | UNS | WERKSTOFF NR. | AFNOR | JIS | BS | GOST | EN |
| Inconel 600 | N06600 | 2.4816 | NC15FE11M | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NiCr15Fe |
Also referred as WNR 2.4816, WNR 2.4851, WNR 2.4856 and WNR 2.4668, we offer the same in quite reasonable rates to our esteemed clients
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Size | M3 TO M52 |
| Thread Type | PITCH |
| Material Grade | Inconel |
| Grade | Inconel 625 |
| Rust Resistant | Yes |
| Material | Inconel |
| Specifications | : | ASTM B 166 ASME SB 166 |
| Standard | : | DIN, ASTM, BS and all International Standards |
| Length | : | 3 mm to 200 mm |
| Size | : | M3 M56 | 3/6 to 2 | Custom Sizes |
| Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
OTHER GRADES OF INCONEL BOLTS
CHARACTERISTICS OF INCONEL BOLTS
» Good resistance to acids, such as sulfuric, phosphoric, nitric, and hydrochloric
» Almost completely free from chloride induced stress corrosion cracking
» Excellent mechanical properties at both extremely low and extremely high temperatures
» Outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion
» High resistance to oxidation at elevated temperatures
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Nut Type | HEX NUT |
| Material | INCONEL |
| Grade | 825 |
| Shape | Circle, Cylinderical, Round |
| Length | 10 MM TO 3000 MM |
| Thread Type | Yes |
| Specifications | : | ASTM B 166 ASME SB 166 |
| Standard | : | DIN, ASTM, BS and all International Standards |
| Length | : | 3 mm to 200 mm |
| Size | : | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
OTHER GRADES OF INCONEL BOLTS
CHARACTERISTICS OF INCONEL BOLTS
» Good resistance to acids, such as sulfuric, phosphoric, nitric, and hydrochloric
» Almost completely free from chloride induced stress corrosion cracking
» Excellent mechanical properties at both extremely low and extremely high temperatures
» Outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion
» High resistance to oxidation at elevated temperatures
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material Grade | Inconel |
| Grade | 600 |
| Type | WASHER |
| Color | PTFE COATED |
| Resistant Temperature | Annealed** |
| Material | METAL |
| Specifications | : | ASTM B 166 ASME SB 166 |
| Standard | : | DIN, ASTM, BS and all International Standards |
| Length | : | 3 mm to 200 mm |
| Size | : | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
OTHER GRADES OF INCONEL BOLTS
CHARACTERISTICS OF INCONEL BOLTS
» Good resistance to acids, such as sulfuric, phosphoric, nitric, and hydrochloric
» Almost completely free from chloride induced stress corrosion cracking
» Excellent mechanical properties at both extremely low and extremely high temperatures
» Outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion
» High resistance to oxidation at elevated temperature
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material Grade | Inconel |
| Grade | 600 |
| Type | STUD |
| Finishing | PTFE COATED |
| I Deal In | New Only |
| Material | METAL |
| Specifications | : | ASTM B 166 ASME SB 166 |
| Standard | : | DIN, ASTM, BS and all International Standards |
| Length | : | 3 mm to 200 mm |
| Size | : | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
OTHER GRADES OF INCONEL BOLTS
CHARACTERISTICS OF INCONEL BOLTS
» Good resistance to acids, such as sulfuric, phosphoric, nitric, and hydrochloric
» Almost completely free from chloride induced stress corrosion cracking
» Excellent mechanical properties at both extremely low and extremely high temperatures
» Outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion
» High resistance to oxidation at elevated temperatures
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Finish | Polished |
| Material Grade | Inconel |
| Grade | 600 |
| Type | SCREW |
| Color | PTFE COATED |
| Material | METAL |
| Specifications | : | ASTM B 166 ASME SB 166 |
| Standard | : | DIN, ASTM, BS and all International Standards |
| Length | : | 3 mm to 200 mm |
| Size | : | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
OTHER GRADES OF INCONEL BOLTS
CHARACTERISTICS OF INCONEL BOLTS
» Good resistance to acids, such as sulfuric, phosphoric, nitric, and hydrochloric
» Almost completely free from chloride induced stress corrosion cracking
» Excellent mechanical properties at both extremely low and extremely high temperatures
» Outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion
» High resistance to oxidation at elevated temperatures
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Flange Face Type | WNRF |
| Size | 5-10 inch |
| Grade | 625 |
| Material Standard | ASTM A182 |
| Material | Inconel |
| Diameter | 1/2 inch TO 48 inch |
| I Deal In | New Only |
| Product Customization | Yes |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material Grade | 625 |
| Fittings | Elbow 90 Deg, Elbow 45 Deg, Elbow 180 Deg |
| Max Size | 600 NB |
| Min Size | 15 NB |
| Is It ISO Certified | YES |
| I Deal In | New Only |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Size | 2 inch |
| Material | Inconel |
| Usage/Application | Chemical Fertilizer Pipe |
| Application | Chemical Fertilizer Pipe |
| Type | Elbow, Tee, Reducer |
| Connection | Female, Flange, Male |
| Material Grade | 625 |
| Diameter | 15 NB To 42 NB |
| I Deal In | New Only |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material Grade | Inconel |
| Grade | 625 |
| Type | Bolts Stud Bolts,Hex Head Bolts,Socket Hexagon Head Screw Anchor Bolts |
| Surface Finish | Blackeing, Cadmium Zinc Plated, Nickel Plated |
| Shape | Circle, Cylinderical, Round |
| Thread Type | Yes |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Grade | C267 |
| Material Grade | Inconel |
| Application | Gas Handling |
| Standard | SCH 5S,10S,10,20,40S,40,STD |
| Single Piece Length | 6 meter, 3 meter |
| Range | Seamless,Erw,Welded,Fabricated |
| Diameter | 15 NB up to 600 NB |
| Size/Diameter | 2 inch |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material | Inconel |
| Material Grade | 625 |
| Type | Bar |
| Unit Length | 9 m, 12 m, 6 m |
| Single Piece Length | 6 meter, 18 meter, 3 meter |
| Usage/Application | Manufacturing |
| I Deal In | New Only |
Additional Information:
Product Details:
| Usage/Application | Industrial |
| Flange Type | Wnrf |
| Finish | Coated |
| Material Standard | ASTM A105 |
| Grade | INCONEL |
| Diameter | 1/2" TO 6" |
| Standard | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
|---|---|
| Size | 1/2"-100", SCH5S-SCH160, XS, XXS, STD |
| Dimensions | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Standard | ANSI, ISO, ASME, DIN, ASTM, AISI |
| Surface | pickling, annealing, bright, sand blast, hair line |
| Type | Plate Flange, Flat Flange, Slip on Flange, Welding Neck Flange, Long Welding Neck Flange, Blind Flange, Socket Welding Flange, Thread Flange, Screwed Flange, Lap Joint Flange |
| Connection type | Raised Face, Flat Face, Ring Type Joint, Lap-Joint Face, Large Male-Female, Small Male-Female, Large Tongue, Groove, Small Tongue, Groove. |
| Class / Pressure | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Specialized in | A182 Alloy Steel Slip-On Flanges, A182 Alloy Steel Threaded Flanges, A182 Alloy Steel Weld Neck Flanges, A182 Alloy Steel Socket Weld Flanges, A182 Alloy Steel Blind Flanges, A182 Alloy Steel Reducing Flanges,A182 Alloy Steel Lap Joint Flanges, A182 Alloy Steel Plate Flanges |
| Export to | Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material Grade | 625 |
| Plate Type | Thin sheet, Nickel Plate, Inconel Plate |
| Material | INCONEL |
| Size | 0.1 mm to 100 mm Thick |
| Product Type | Sheet Plate & Coil |
| I Deal In | New Only |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material Grade | INCONEL 625 |
| Usage/Application | Gas Handling |
| Single Piece Length | 3 meter, 6 meter |
| Shape | ROUND |
| Size/Diameter | 2 inch |
| International Specifications | STM A/ASME SB163 |
| ncoloy Welded Tubes Specifications | ||
| Specifications | : | ASTM A/ASME SB163/B163/B516 |
| Dimensions | : | ASTM, ASME and API |
| Tubes Size | : | 6 mm OD x 0.7 mm to 50.8 mm OD x 3 mm thk. |
| Schedule | : | SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Type | : | Seamless / ERW / Welded / Fabricated / LSAW Tubes |
| Form | : | Round, Square, Rectangular, Hydraulic Etc |
| Length | : | Single Random, Double Random & Cut Length. |
| End | : | Plain End, Beveled End, Treaded |
Types of Inconel Tubes
| Inconel Seamless Tube | Incoloy Seamless Tubes Inconel Seamless Tubes ASME SB163 Incoloy Seamless Tube | |
| Inconel Welded Tube | Incoloy Welded Tubes Inconel Welded Tubes ASTM B163 Incoloy Welded Tubes | |
| Inconel Round Tubes | Inconel Round Tubes Incoloy Round Tube ASTM B163 Inconel Round Tubes | |
| Inconel Decorative Tube | Inconel Decorative Tube Incoloy Decorative Tube ASTM B163 Inconel Decorative Tubes | |
| Inconel Polish Tube | Incoloy Polish Tubes Inconel Polish Tubes ASTM B163 Incoloy Polish Tube | |
| Inconel Instrumentation Tube | Inconel Instrumentation Tubes Incoloy Instrumentation Tube ASTM B163 Inconel Instrumentation Tubes | |
| Inconel Heat Exchager Tube | Inconel Heat Exchager Tubes Incoloy Heat Exchager Tubes ASTM B163 Inconel Heat Exchager Tubes |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Type | Seamless |
| Usage/Application | Gas Handling |
| Size/Diameter | 3 inch |
| Single Piece Length | 6 meter, 3 meter |
| Hole Type | Square, Round, Lipped |
| International Specifications | ASTM B163 |
| Incoloy Welded Tubes Specifications | ||
| Specifications | : | ASTM A/ASME SB163/B163/B516 |
| Dimensions | : | ASTM, ASME and API |
| Tubes Size | : | 6 mm OD x 0.7 mm to 50.8 mm OD x 3 mm thk. |
| Schedule | : | SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Type | : | Seamless / ERW / Welded / Fabricated / LSAW Tubes |
| Form | : | Round, Square, Rectangular, Hydraulic Etc |
| Length | : | Single Random, Double Random & Cut Length. |
| End | : | Plain End, Beveled End, Treaded |
Types of Inconel Tubes
| Inconel Seamless Tube | Incoloy Seamless Tubes Inconel Seamless Tubes ASME SB163 Incoloy Seamless Tube | |
| Inconel Welded Tube | Incoloy Welded Tubes Inconel Welded Tubes ASTM B163 Incoloy Welded Tubes | |
| Inconel Round Tubes | Inconel Round Tubes Incoloy Round Tube ASTM B163 Inconel Round Tubes | |
| Inconel Decorative Tube | Inconel Decorative Tube Incoloy Decorative Tube ASTM B163 Inconel Decorative Tubes | |
| Inconel Polish Tube | Incoloy Polish Tubes Inconel Polish Tubes ASTM B163 Incoloy Polish Tube | |
| Inconel Instrumentation Tube | Inconel Instrumentation Tubes Incoloy Instrumentation Tube ASTM B163 Inconel Instrumentation Tubes | |
| Inconel Heat Exchager Tube | Inconel Heat Exchager Tubes Incoloy Heat Exchager Tubes ASTM B163 Inconel Heat Exchager Tubes |