Rimco Overseas
Bhuleshwar, Mumbai, Maharashtra
GST No. 27ADVPJ1765B1ZF
TrustSEAL Verified
View Mobile No.
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Media | Gas |
| End Connection | Butt Weld |
| Power | Hydraulic |
| Certification | IBR, CE, EIL |
| Material Grade | 316L |
| Power Source | Hydraulic |
| Automation Grade | Automatic |
| Color | Blue |
| I Deal In | New Only |
Isolation
Lift Type Design Welded & Renewable Seat Rings
800#, 1500# , 2500#
BS 5352
ISO 5208
15 mm to 50 mm
Body : A105, F11, F22, LF2, F304, F304L, F316, F316L
Trim : 13 % Cr, Stellite etc
Screwed End, Socket Weld End, Butt Weld End
Manual
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Pressure | High Pressure |
| Design | BALL |
| Temperature Of Media | High Temperature |
| WOG Rating | 150, 600, 300 |
| Coating | PTFE |
| Material Grade | 316L |
Isolation
Full Bore, Reduce Bore, Regular Bore
Blow Out Proof Stem
Low Torque
Floating Ball
Mounting Pad on request
600# , 800#
BS EN ISO 17292
API 598
15 mm to 50 mm
Body : A105, WCB, CF8, CF8M, Hast Alloy, Super Duplex, Alloy 20 , LCB etc
Seat : PTFE , reinforced PTFE, Nylon, etc
Screwed End, Socket Weld End
Manual
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Power | Manual |
| Operator | Lever |
| Media | Gas,Fuel,Powder/Solids |
| Temperature Of Media | High Temperature |
| Operation Type | By Lever,By Gear,By Motor,By Actuator |
| Is It Customized | Customized |
| I Deal In | New Only |
| DESIGN | Wafer |
| TYPE | Soft Seated Offset- Series 230 Metal To Metal- Series 240 Sleeved- Series 250 |
| SIZE | 50 to 900 mm (2” to 36”) |
| RATING | 150# |
| FLOW CHARACTERISTIC. | Throttling, On-Off. |
| MATERIALS BODY | Cast Iron, Carbon Steel, Stainless Steel etc. |
| VANE | Carbon Steel ,Stainless Steel. |
| BODY SLEEVE | Neoprene, Nitrile, PTFE, EPDM, Silicon, Butyl, Viton etc. |
| SOFT SEAT | PTFE. |
| GLAND PACKING | PTFE V Rings upto 180° C Grafoil upto 400° C. |
| ACTUATOR FORM | Diaphragm, Rotary, Electric. |
| ACTUATOR TYPE | Scotch |
| DIAPHRAGM | Nitrile / Neoprene |
| SPRING RANGE | 3 – 15 Psig (0.2 – 1.0 Kg/cm²) 6 – 30 Psig (0.4 – 2.0 Kg/cm²) |
| AIR SUPPLY | 20 – 35 Psig (1.4 – 2.5 Kg/cm²) |
| AIR CONNECTION | 1/ 4” or 1/ 2” NPT |
| ACCESSORIES OPTIONAL | Valve Positioner – Pneumatic, Electro Pneumatic, Smart, Airset, Solenoid Valve, Air Lock, Volume Booster Limit Switches- Micro/Proximity with Dome Indicator. Top or Side Mounted Handwheel Limit Stops |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material | Carbon Steels, Low Temperature Carbon Steel, Austenitic Stainless Steel, Duplex S |
| Pressure | ASME 150 to 2500 |
| Threaded End | Screwed, Socket Weld, Flanged, Hub End, Butt Weld |
| Flange End Size | 1/2 up to 36 DN15 up to Dn900 |
| Operator | Lever, Wrench, Pneumatic |
| I Deal In | New Only |
Plug Valves are available in three different types versions
• Full Bore
• Regular Bore
• Extended Stem Valves
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Media | Gas |
| Temperature Of Media | High Temperature |
| Usage/Application | Isolation |
| Features | Screwed End, Socket Weld End, Butt Weld End, Flange End |
| Seat Orifice Size | 1/2" TO 36 INCH |
Isolation
OS & Y Construction
Welded & Renewable Seat Rings Pressure Seal Welded Bonnet on request for High Pressure
800#, 1500# , 2500#
API 602
API 598
15 mm to 50 mm
Body : A105, F11, F22, LF2, F304, F304L, F316, F316L
Trim : 13 % Cr, Stellite etc
Screwed End, Socket Weld End, Butt Weld End, Flange End
Manual
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Body Material | Stainless Steel |
| Media | Oil |
| Driving Mode | Electric, Hydraulic, Manual |
| Automation Grade | Automatic |
| Type | Globe |
| End Connection | Screwed End, Socket Weld End, Butt Weld End, Flange End |
| Features | BS 5352 |
| Pressure Rating | 800#, 1500# , 2500# |
| Place Of Origin | INDIA |
| Power | Hydraulic |
| I Deal In | New Only |
Throttling
OS & Y Construction Welded & Renewable Seat Rings Pressure Seal Welded Bonnet on request for High Pressure
800#, 1500# , 2500#
BS 5352
ISO 5208
15 mm to 50 mm
Body : A105, F11, F22, LF2, F304, F304L, F316, F316L
Trim : 13 % Cr, Stellite etc
Screwed End, Socket Weld End, Butt Weld End, Flange End
Manual
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material Grade | A105,F304,F316 |
| Material | STAINLESS STEEL |
| Dimensions | 15 to 50MM |
| Type | PISTON |
| Corrosion Resistance | Yes |
| Coated | Yes |
Inflammable , Explosive , Poisonous , Precious media
OS & Y Construction , Zero Leakage Valve , Double Seal Design
150# , 300# , 800#
ISO 15761
API 598/602
15 to 50MM
A105 , F304 , F316
Screwed End , Socket Weld End , Butt Weld End
Manual
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Structure Type | Needle |
| Media | Water,Oil,Air |
| Port Size | 6NB to 25NB |
| End Connection | NPT,BSPT,Socket Weld,Butt Weld,Tube Fitting |
| Connection | THREADED |
| I Deal In | New Only |
Specification of Needle Valves
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material | A105, F11, F22, F51, LF2, F304, F304L, F316, F316L |
| Pressure | 800#, 1500# , 2500# |
| End Connection | Screwed End, Socket Weld End, Butt Weld End |
| Automation Grade | Automatic |
| Rating | 15 mm to 50 mm |
| I Deal In | New Only |
Product Details
|
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Media | Gas |
| Fluid Media | Gas,Fuel |
| Usage/Application | pipelines,systems and machinesAWH Non-Return Valve suitable for liquid products,additives and clea |
| Color | Silver |
| I Deal In | New Only |
| Size | 2 (50mm) to 12 (300mm) |
| End Connection | Wafer Between PN1016 Flanges |
| Material | Housing: 1.4301 (304) / 1.307 (304L) / 1.4404 (316L) |
| Operating pressure | max. 10 bar / 145 psi |
| Opening pressure | 0,05 bar / 0,7 psi (others on request) |
| Operating temperature | max. 80°C / 176°F |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Media | Fuel, Air |
| Automation Grade | Automatic |
| Port Size | 1/2 INCH |
| Material | Stainless Steel |
| I Deal In | New Only |
| Fire Safe | Yes |
Two-Way Directional Valve
A two-way directional valve passes air in two directions, through two ports which can be open or closed. If the valve ports are closed no air can flow through the valve. If the ports are open, air may move from the first port through the valve and through the second port or in the opposite direction.
Three-Way Directional Valve
A three-way directional valve has three ports, each of which serves a different purpose. The first port is used to connect the valve to an actuator or another device. The second port is connected to an air-flow. The third port is used as an exhaust exit. When the first and second ports are open and the third is closed, air moves through the valve to the device. When the first and third ports are open and the second port is closed, the actuator can vent exhaust. Three-way valves are often connected to actuators in cylinders, or used in pairs and connected to double-acting cylinders.
Four-Way Directional Valves
A four-way directional valve has four distinct ports, two of which connect to actuators, one that connects to a pressurized air-flow, and one that serves as an exhaust pathway. They are among the most common types of valves found in pneumatic systems because the four distinct paths allow the valve to effectively reverse the motion of a motor or basic cylinder. An additional port is sometimes added to a four-way valve, making it a five-ported four-way valve. A four-way valve with an additional port is often used to provide dual pressure, meaning the valve can apply one of two kinds of pressure and alternate between the two depending on what the application requires. Alternatively, the valve can use the other port as a secondary exhaust port.
Spring Offset
This type of pneumatic valve classification refers to the manner in which air-flow direction is switched. For example, in a two-way directional valve, the valve is either open (air-flow is enabled) or closed (air-flow is prevented). In order for each port to assume an open or close position, an actuator moves a valve spool into position. To release the valve spool and return the pneumatic valve to its previous position, a spring releases the spool. A two-way directional valve that functions in this manner is also called a spring offset valve.
Resting state: Open v. Closed
In two-way directional spring offset valves, there are two positions they can assume when the connected actuator isn’t active: open or closed. In devices where an open resting position is standard, air moves freely through the valve. In a closed resting state, the air-flow is blocked. In three-way valves, one port is always open. In such cases, a closed resting state usually results in blocking the air-flow port, so pressure isn’t moving unless the device is turned on.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Media | Gas |
| End Connection | Socket Weld |
| Power | Hydraulic |
| Certification | EIL,IBR,CE |
| Power Source | Hydraulic,Manual |
| Automation Grade | Automatic |
| I Deal In | New Only |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Media | Gas |
| End Connection | Butt Weld |
| Material | Carbon Steel,Stainless Steel,Mild Steel |
| Pressure | High Pressure |
| Power Source | Hydraulic |
| Automation Grade | Automatic |
| I Deal In | New Only |
Isolation
Lift Type Design Welded & Renewable Seat Rings
800#, 1500# , 2500#
BS 5352
ISO 5208
15 mm to 50 mm
Body : A105, F11, F22, LF2, F304, F304L, F316, F316L
Trim : 13 % Cr, Stellite etc
Screwed End, Socket Weld End, Butt Weld End
Manual
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material | Cast Iron, Cast Steel, SS 304 / 316, SS 304L / 316L, Gunmetal etc. |
| Brand | AIL |
| I Deal In | New Only |
| Corrosion Resistance | Yes |
| Rust Resistance | Yes |
| Rotary Type | Yes |
SIZE AVAILABLE : ½" X ¾ " TO 16" X 18"
END CONNECTION : Screwed, Flanged End Safety Relief Valves, Safety Relief Valves
WIDELY USED FOR : Steam Boilers, Steam Services, Compressors, Receivers, Burners, Dryers and other Piping Systems and Many More.
DESIGN : | Self Actuating, Full Lift, Spring Loaded. |
DISCHARGE : | Angle |
BONNET : | Open or Closed |
PRESSURE RATING : | 150#, 300#, 600# |
MOC : | Cast Iron, Cast Steel, SS 304 / 316, SS 304L / 316L, Gunmetal etc. |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Body Material | Stainless Steel |
| Material | 361L |
| Driving Mode | Manual,Electric,Hydraulic |
| Automation Grade | Automatic |
| Power | Hydraulic |
| I Deal In | New Only |
Steam , Thermic Fluids , Acids , Gases , Vacuum and other Critical media
Seatless , Glandless , Renewable Sealing Ring
800#
API 602
API 598
15 to 40 MM
A105 , F304 , F316
Screwed End , Socket Weld End , Butt Weld End
Manual
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material | Cast Iron,Carbon Steel,SS 304 / 316 |
| Color | Black,Blue,Red |
| Grade | 316L |
| I Deal In | New Only |
| Max Pressure | ASA 150 |
| Packaging Type | BOX |
TYPE : | O.S. & Y Type, Rising Spindle Pulp Valves |
MOC : | Cast Iron, Carbon Steel, SS 304 / 316 |
PRESSURE RATING : | ASA 150# |
END CONNECTION : | Wafer Type |
| SIZES : | 2" TO 18" |
| DRILLING ANSI : | B 16.5, BS 10 TABLE "D", "E" & "F" ar Pulp Valves for Slurry Lines, Sludge and Viscous Media Handling, Pulp and Paper Stock Lines, Dry Solid, Powder Handling and Many More. |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Size | 1/2" TO 6 INCH |
| Material Grade | Monel, Inconel, Hastelloy, Duplex steel are also available on request. |
| Automation Grade | Automatic |
| Pressure | 413 bar / 6000 PSI at 1000 C |
| Connection Size | 1/2 INCH |
| End Connection | Flanged |
| I Deal In | New Only |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material | SS 304/ SS 316 |
| Media | Gas |
| End Connection | Flange End,Butt Weld,Screwed End |
| Connection Type | Flanged To BS,ANSI,DIN,Screwed,SWE,BW |
| Diameter | 15 MM TO 2000 MM. |
| Finishing | PTFE |
| Port Size | 1/2 INCH |
| Automation Grade | Automatic |
| I Deal In | New Only |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Pressure | High Pressure |
| Temperature Of Media | High Temperature,Low Temperature,Medium Temperature,Normal Temperature |
| WOG Rating | 150,300,600 |
| Port Size | 1/2 To 4 INCH |
| Coating | PTFE |
| Range | Class 150 |
| Materials Body, Ball & Seat: WCB/CF8/CF8M /Others On request Codes & Standards :
| ||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Valve Type | Automatic Control Valve |
| Pressure | Reduces high upstream pressure to lower downstream pressure. CONSULT FACTORY for control |
| Fluid Media | Air,Gas,Fuel |
| Port Size | 1 1/2 to 36 in. (40 to 900 mm) |
| Finish | FINE |
| I Deal In | New Only |
Plug Valves are available in three different types versions
• Full Bore
• Regular Bore
• Extended Stem Valves
Additional Information: